10x10 Patio Calculator

10 × 10 = 100 square feet (about 9.3 m²). Building a patio this size? Plan on roughly 1-1.25 tons flagstone and ~1.6 cubic yards (4" base, incl. compaction). The calculator below refines it for your stone.

A 10x10 patio provides 100 square feet of outdoor living space - perfect for a small bistro set or intimate seating area.

Dimensions

10' x 10'

Area

100 sq ft

Size Category

Small

Calculate Materials for Your 10x10 Patio

Pre-filled for 10x10 (10' x 10'). Adjust if needed.

About 10x10 Patio Patios

A 10x10 patio provides 100 square feet of outdoor living space - perfect for a small bistro set or intimate seating area.

What a 10x10 Patio is Great For

  • Small bistro dining area for 2
  • Compact grill station
  • Quiet reading nook
  • Container garden base

Design Tips for 10x10 Patios

  • Ideal for smaller backyards or side yards
  • Consider extending with a connecting walkway
  • Round table fits better than rectangular in this space

Quick Material Estimates

Stone (Flagstone)

1-1.25 tons flagstone

Base Gravel

~1.6 cubic yards (4" base, incl. compaction)

* Estimates vary by stone type. Use the calculator above for precise quantities.

Design First, Order Less

People typically over-order stones for a 10x10 patio. Design your layout digitally to know exactly what you need.

  • Upload photos of your actual stones
  • Arrange them to fit perfectly
  • Order only what you need
Plan My Delivered Stones

Material Tips

Base: Provides drainage and stability

Sand: Creates level surface for stones

Waste: 10% extra included for cuts and breakage

Your project, routed by what happens next

Where are you in the patio project?

Choose the closest stage. The article and calculators stay completely free and available.

01 I’m choosing a material

Compare cost, upkeep, climate fit, and appearance before you commit.

Compare flagstone, bluestone, and pavers Email me the free decision report
02 I need to know how much to order

Calculate stone, base gravel, and bedding sand without giving up your contact details.

Calculate my material order Check a stone waste allowance
03 My stones are delivered

Use one non-renewing Project Pass for this DIY job, or begin in the no-card planner.

Choose the DIY Project Pass Use the no-card planner instead
04 I want someone to plan or install it

Have an experienced stonemason design the layout for your actual stones, or use the field guide with an installer you choose.

See the Patio Design Service Use the DIY layout guide

10x10 Patio Patio FAQ

How many square feet is a 10x10?

A 10 by 10 foot area is 100 square feet (10 × 10 = 100), or about 9.3 square meters.

How much stone do I need for a 10x10 patio?

A 10x10 patio covers 100 square feet. For flagstone, you'll need approximately 1-1.25 tons flagstone. For standard pavers, calculate based on paver size. Always order 10-15% extra to account for cuts and breakage.

How much gravel do I need for a 10x10 patio base?

For a 10x10 patio (100 sq ft) with a standard 4-inch base, you'll need ~1.6 cubic yards (4" base, incl. compaction), already including the 30% compaction allowance. Use 6 inches of base for heavy-use areas or clay soil.

What furniture fits on a 10x10 patio?

A 10x10 patio (100 sq ft) is ideal for: Small bistro dining area for 2, Compact grill station, Quiet reading nook, Container garden base. Consider your primary use when planning furniture placement.

Is a 10x10 patio big enough?

A 10x10 patio provides 100 square feet of outdoor living space. This is considered a small patio. A 10x10 patio provides 100 square feet of outdoor living space - perfect for a small bistro set or intimate seating area. The right size depends on your intended use and available space.